Answers are grounded in this paper and cite their sources.
Broadband polarization detection is important for visible-to-short-wave infrared vision systems. However, compact polarimetric photodetectors face two challenges: planar detectors integrated with metallic polarization gratings often show reduced absorption due to high optical reflection and Ohmic losses, while single-diameter nanowire (NW) arrays exhibit narrow absorption bandwidths. To address these challenges, we design an on-chip broadband polarimetric photodetector integrating an inversely designed multi-diameter InGaAs NW array with an Al subwavelength grating. By optimizing the diameter distribution of the NW array via particle swarm optimization, our design promotes the spectral overlap of diameter-dependent resonant modes. This reduces the absorption dips observed in uniform NW arrays, achieving an average absorption of 88.4% in the InGaAs active region over the primary 600–1600 nm band, with the absorption edge extending to over 1700 nm. Through near-field coupling, the Al grating funnels TM-polarized light into the resonant NWs while suppressing TE-polarized penetration, yielding a theoretical linear polarization extinction ratio of up to 1.04 × 106. Electrical simulations of the NW array under a prescribed photogeneration condition show a low dark current density of 1.76 × 10−5 A·cm−2 and an ON/OFF current ratio of 1.77 × 104 at −0.5 V. These results suggest that the proposed multi-diameter NW/grating design offers a feasible route toward compact broadband polarization-sensitive photodetectors.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: