Answers are grounded in this paper and cite their sources.
In this study, a graphene oxide (GO)-modified cellulose-based hybrid adsorbent material was developed for wastewater treatment. The hybrid material, obtained by immobilizing GO suspension onto cellulose filter paper via dip-coating, was tested using Methylene Blue (MB), selected as a representative model cationic dye pollutant. FTIR spectral analysis confirmed the successful formation of the GO-cellulose hybrid structure, showing characteristic functional group shifts (O-H at 3332 cm-1 and C=C at 1639 cm-1). The hybrid material treated a 10 ppm MB solution with 96.66% efficiency (qt = 64.44 mg/g) within 60 min. Control experiments showed that pure cellulose has a limited adsorption capacity (0.456 mg/g capacity and 45.63% efficiency), demonstrating a 141-fold capacity increase with the GO-cellulose hybrid. Supported by FTIR spectral analysis and kinetic modeling, the GO-cellulose hybrid significantly enhanced dye retention due to strong electrostatic attraction between oxygen-containing functional groups on GO and MB cations, complemented by pi - pi stacking mechanisms. Kinetic analyses confirmed an excellent fit to the pseudo-second-order model (R2 = 0.9990), indicating chemisorption as the rate-limiting step. Furthermore, the hybrid material demonstrated high structural stability, maintaining over 94% performance retention over three consecutive cycles. This study provides a low-cost, high-performance nanotechnological foundation for environmental remediation by combining biodegradable cellulose with GO.
No takes yet. Share an insight, caveat, or question.
Bertiz et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: