Answers are grounded in this paper and cite their sources.
One of the most important and costly procedures in today's manufacturing sectors is precision surface finishing, especially for parts with intricate geometries and complex internal pathways. Uniform surface finishing in such hard-to-reach areas is made possible by Abrasive Flow Machining (AFM), a sophisticated non-traditional finishing technique. In this work, stir casting was used to create AA6061/SiC Nano Metal Matrix Composites (NMMCs) reinforced with 1-6 weight percent nano-SiC particles, which were then completed using a specifically designed AFM setup with a silicon-based abrasive medium. Surface roughness (Ra) and material removal rate (MRR) were examined experimentally in relation to extrusion pressure (50-200 MPa), abrasive mesh size (60-240 mesh), and number of machining cycles (1,000-5,000). With a maximum MRR of 0.124 g/min and a surface roughness reduction from 1.82 µm to 0.42 µm, the ideal finishing conditions were achieved at 8 MPa extrusion pressure, 500-mesh abrasive, and 25 cycles. When compared to the unreinforced AA6061 alloy, mechanical characterization showed that the addition of 4 weight percent nano-SiC generated the best overall attributes, increasing hardness by about 28%, improving ultimate tensile strength by 24%, and reducing wear rate by about 32%. While X-ray diffraction patterns indicated the presence of Al and SiC phases without unwanted reaction products, scanning electron microscopy and energy-dispersive X-ray spectroscopy investigations revealed the uniform dispersion and strong interfacial bonding of nano-SiC particles. The results demonstrate that AFM significantly enhances the surface integrity of AA6061/SiC NMMCs while maintaining controlled material removal, making it an effective finishing process for high-precision aerospace, automotive, and advanced engineering components.
No takes yet. Share an insight, caveat, or question.
KondalaRao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: