Answers are grounded in this paper and cite their sources.
Low‐frequency noise characterized by long wavelengths, slow attenuation, and strong penetrability remains a persistent common challenge in equipment manufacturing and human habitat acoustic optimization. To address these limitations, this study aims to develop ultrathin and flexible composite films for low‐frequency coherent perfect absorption (CPA). Rigid particles‐polyurethane/polydimethylsiloxane flexible composite films were prepared via a facile dipping‐vacuum curing method. By modulating film thickness, particle mass fraction, particle size, and particle density with a single‐degree‐of‐freedom equivalent acoustic impedance model, the low‐frequency sound absorption behavior and impedance matching characteristics of the composite films were systematically investigated. The results demonstrate that the 1 mm thick composite film filled with 20 wt.% 400 mesh Fe particles at 209 Hz, as well as the corresponding Cu‐particle‐filled sample at 165 Hz, both reach the theoretical upper limit of 0.50 for single‐side incident, backing‐cavity‐free, monolayer, and reciprocally symmetric two‐port membrane systems. Furthermore, both the reflection and transmission coefficients are approximately 0.50, demonstrating substantial CPA potential. The resulting composite films exhibit superior flexibility and deformability, enabling conformal attachment to complex curved surfaces, and show significant potential for batch manufacturing and roll‐to‐roll processing. This work provides new insights into the design and engineering implementation of membrane‐type acoustic CPA devices.
No takes yet. Share an insight, caveat, or question.
Guo et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: