Answers are grounded in this paper and cite their sources.
Electrohydraulic shakers are used widely in vibration testing and dynamic loading depending on its high load capacity and large output force. Conventional electrohydraulic shakers perform well at low-medium frequencies, but stability and control accuracy at high frequencies is reduced by the limitation of servo valve. This study proposes a high-frequency rotary valve and its application on electrohydraulic shaker. The valve will provide high frequency flow direction control through spool’s high-speed rotation, and drive the reciprocating motion of the hydraulic cylinder rapidly to achieve high-frequency vibration of the shaker. A Back Propagation (BP) neural network-based PID controller is carried out to increase dynamic performance, also simulation and analysis studies were conducted compared with conventional PID control. Experiments table is built to validate control accuracy of acceleration amplitude, displacement step response and displacement tracking in low frequency. Results show that overshoot in acceleration amplitude is reduced to within 2% in BP-PID controller and settling time is 30–40 cycles earlier than conventional PID. Step time in displacement response was decrease to at most 65%. Displacement tracking error decreased from ±0.35 to ±0.1 mm in 0.1–0.5 Hz. It is significant to use the BP-PID controller in optimization of dynamic response and displacement accuracy, providing an effective solution for high-frequency vibration testing under large-load conditions.
No takes yet. Share an insight, caveat, or question.
Qin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: