Answers are grounded in this paper and cite their sources.
One of the biggest limitations for the use of iron in biodegradable implant material applications is its slow corrosion rate and stress shielding. This research, therefore, focuses on the potential of increasing the corrosion rate and reducing the stiffness by tailoring the porosity of the substrates. The materials were prepared using powder bed fusion-electron beam melting, which allows for a high adjustment of porosity. The corrosion behavior was revealed via electrochemical impedance spectroscopy with modified simulated body fluid as an electrolyte over an immersion time of up to 48 h. Additionally, the corrosion products were investigated with Raman spectroscopy and energy-dispersive X-ray spectroscopy to reveal details of the corrosion mechanism. Corrosion rates were increased with higher porosity, and a critical pore size was found to be necessary to sustain accelerated corrosion and avoid the blockage of pores with corrosion products. The fatigue studies illustrate the relevance of pores, leading to a reduced fatigue lifetime of the powder bed fusion-electron beam melting Fe samples under corrosive conditions, which can be explained by both stress concentrations at defect sites and enhanced corrosion rates.
No takes yet. Share an insight, caveat, or question.
Theile-Rasche et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: