Answers are grounded in this paper and cite their sources.
X-ray densitometry was evaluated for its suitability to characterize density profiles in chemically modified wood, using sorbitol–citric acid (SorCA)-modified Scots pine sapwood as a model material. Gravimetric layer-by-layer profiling served as the reference method. The influence of sample orientation on X-ray density profiles and the effect of density heterogeneity in more than one anatomical direction were investigated. In unmodified reference samples, the two methods gave comparable results. In modified samples, X-ray densitometry reliably captured the general shape of density profiles and appears suitable for assessing the spatial distribution of chemical loading across the cross-section. However, systematic deviations were observed: density was underestimated in high-density surface zones and overestimated in the low-density core zone. Expressed relative to the density increase due to modification, differences in the core zone were considerable. X-ray density profiles therefore do not allow direct conclusions on local chemical loading. An additional density gradient perpendicular to the profiling direction caused X-ray profiles to vary with sample orientation in the densitometer. Removing this gradient by additional sample preparation reduced this variation but did not improve agreement with the gravimetric reference; this preparation step is therefore not required.
No takes yet. Share an insight, caveat, or question.
Hötte et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: