Answers are grounded in this paper and cite their sources.
Abrasive water jet machining (AWJM) of titanium alloys presents significant modelling challenges because the process responses depend on several interacting parameters in ways that simple regression cannot capture reliably. This paper builds a machine learning framework around XGBoost regression combined with SHapley Additive exPlanations (SHAP) to predict material removal rate (MRR), surface roughness (Ra), and kerf width in AWJM of Ti-6Al-2Sn-4Zr-2Mo alloy. An L18 Taguchi orthogonal array was used to generate 18 experimental runs across four parameters water pressure, abrasive flow rate (AFR), traverse speed (TS), and stand-off distance (SOD). Bayesian hyperparameter tuning gave the XGBoost model a cross-validated R 2 of 0.744 and 0.539 for MRR and Ra, respectively, outperforming the baseline models of linear regression and random forest. SHAP analysis revealed that the effects of water pressure and AFR are the most significant for MRR, while the effect of TS is dominant for Ra. All three responses were then plotted in a Pareto space where the trade-offs between the three responses were mapped and the non-dominated combinations of parameters were identified. The results demonstrate that interpretable ensemble learning is a viable approach for improving the parameter selection of advanced titanium alloy machining.
No takes yet. Share an insight, caveat, or question.
Perumal et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: