Answers are grounded in this paper and cite their sources.
One strategy to mitigate catastrophic failure in ceramics is to add secondary strengthening phases to create ceramic matrix composites (CMCs). A recent CMC concept to provide low‐temperature toughness with high‐temperature survivability has been to facilitate a one‐directional phase transformation that converts metal layers into ceramic layers. We report on the phase evolution of Ta evolving into a carbide in contact with ZrC, with the laminate structure fabricated by layering ZrC powder between Ta foils. Upon consolidation and subsequent annealing at 1600°C, a Ta 2 C interdiffusion zone formed along with the formation of a zirconia scale at the metal/ceramic interface; the oxygen source being its unintentional presence in the carbide stock powder. Upon carbon diffusion from ZrC, the carbide lattice constricts, and microscale boundary decohesion occurs, resulting in spatially dependent porosity near the interface. This carbon depletion coincides with the precipitation of zirconia, suggesting a need for synchronized behavior for it to form. This oxide scale was found to be an effective diffusion barrier, stunting a full carbide conversion. Flexural testing quantified an increase in the maximum functional toughness with the metal layering, but pre‐existing flaws caused segments of the carbide phase to dislodge from the composite during testing.
No takes yet. Share an insight, caveat, or question.
Large et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: