Answers are grounded in this paper and cite their sources.
To address the limitations of traditional jacking force calculation methods in long-distance large-diameter reinforced concrete pipe jacking projects, specifically their insufficient consideration of slurry lubrication evolution and the actual pipe–soil contact state, this study conducts field monitoring and theoretical analysis based on the tailwater discharge pipe jacking project at the Tangxun Lake Wastewater Treatment Plant in Wuhan. Based on the evolutionary characteristics of grouting pressure, circumferential pressure, and unit frictional resistance, the jacking process is divided into three working conditions: no slurry lubrication, gradual development of slurry lubrication, and fully developed slurry lubrication. By introducing the counteracting effect of slurry pressure on traditional circumferential water and soil pressures, a model for effective contact pressure around the pipe is established. Furthermore, the pipe–soil contact range under uplift and subsidence states is determined by analyzing the relationship between segment buoyancy and self-weight. On this basis, the H-B rheological model is introduced to describe the frictional characteristics at the pipe-grout interface, and calculation methods for side frictional resistance and total jacking force under different lubrication conditions are developed. Engineering validation results show that the calculation errors of the proposed model at the ends of three main strata, namely mucky silty clay, silty clay and clay, and strongly weathered muddy siltstone, are −2.2%, 6.9%, and −8.7%, respectively. These errors are significantly lower than the 134.2%, 242.1%, and 258.5% errors observed with standard empirical methods. ABAQUS numerical simulations further indicate that the simulated jacking force under grouting conditions is 5237.6 kN, with an error of 4.19% compared to the measured value of 5026.6 kN. The errors between simulated and measured values in different typical jacking sections are basically controlled within ±15%. The research results demonstrate that considering the counteracting effect of slurry pressure on circumferential water and soil pressures, as well as the evolution of lubrication states, can more reasonably reflect the variation laws of circumferential frictional resistance and jacking force during long-distance pipe jacking construction.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: