Answers are grounded in this paper and cite their sources.
Clean recovery and reuse of solid waste through co‐pyrolysis is important to social development. Co‐pyrolysis of coastal raw municipal sludge (RS) with three types of agricultural/forestry waste revealed that co‐pyrolysis of RS with pine sawdust was the best, with the optimal co‐pyrolysis temperature, time and mixing ratio being 850°C, 90 min and 50%, respectively. To further mitigate potential heavy metal contamination, modified sepiolites were synthesized, among which acid/thermally activated sepiolite (TH‐SP) demonstrated superior control. The addition of TH‐SP increased the absolute solid‐phase retention rates of five targeted heavy metals by 22.15% to 42.89%, successfully classifying all heavy metals as low‐risk. Consequently, 90% of Cr, Cu, and Pb were converted into relatively stable forms, while the stable proportions of Zn and Cd increased by 10%. Overall, Zn exhibited the highest concentration and Cd posed the greatest potential risk, with solid‐phase enrichment following the order of Cr > Zn > Cu/Pb > Cd, and Cu accounting for the largest stable proportion. Furthermore, the adsorption of VOCs by the modified co‐pyrolysis char fitted well with pseudo‐first‐order/Elovich kinetics and Langmuir–Freundlich thermodynamic models. The H‐BC‐N2 exhibited the best adsorption performance for breakthrough time and adsorption volume, and the adsorption capacity remained at 70% even after six cycles, with physisorption dominating the adsorption process. Simulations of adsorption distance, adsorption energy, and frontier molecular orbitals demonstrated strong heavy metal binding onto TH‐SP and excellent VOC adsorption on the modified char. The simulation findings aligned closely with experimental results, confirming the reliability and mechanisms of this process.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: