Answers are grounded in this paper and cite their sources.
This paper presents the mechanical design, preliminary hydrodynamic simulations, and experimental pool evaluation of a batoid robot featuring actively controlled pitch–twist motion and a passive distal fin tip. Each pectoral fin incorporates three actuated inputs: root flapping driven by a stepper motor and two differential outputs controlled by two servomotors, explicitly mapped to pitch and twist. Computational fluid dynamics (CFD) analyses utilizing prescribed kinematics were conducted to examine force trends and derive a preliminary unilateral-fin force fit. A surge equation incorporating an explicit two-fin sign convention and an added-mass term was formulated; a sensitivity analysis evaluating added masses of 0, 5, and 10 kg showed that, while added mass altered the modeled transient response, it changed the late-time periodic mean by no more than 0.001 m/s. Experimental pool testing demonstrated rectilinear swimming, diving, surfacing, and in-place turning capabilities. Under standard operating conditions, the fourth-cycle mean velocity was 0.36 m/s (0.45 body lengths per second). In contrast, the zero-added-mass surge model predicted 0.51 m/s, approximately 44% higher, suggesting that the model provides a baseline estimate rather than a validated prediction. Furthermore, the peak cycle-mean velocity of 0.42 m/s decreased by 11.9% in the subsequent cycle, confirming that steady-state operation had not yet been achieved. While the results establish prototype feasibility, passive-tip benefit, efficiency, and operation at the 30 m design depth remain to be demonstrated.
No takes yet. Share an insight, caveat, or question.
Tang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: