Answers are grounded in this paper and cite their sources.
Purpose The purpose of this paper is to present semi-analytical modeling, by coupled electrical circuits, of an electrical generator and mechanical damper using permanent magnets. Design/methodology/approach The work is based on the coupled electrical circuit method (CCM), which describes the electromagnetic interactions between several windings. The application of this method is associated with the Ampere model for modeling permanent magnets and with Fredholm integral equations for modeling the iron. The electromagnetic coupling leads to a system of coupled differential equations. The electromagnetic model is applied to the automotive suspension whose mechanical model is a two-degree-of-freedom differential system. For resolution, we adopt a weak coupling scheme where the electromagnetic and mechanical models are solved separately. Their solution is performed in MATLAB using the Runge-Kutta method. Findings The alternating arrangement of magnets and coils provides a significant and usable electrical voltage as well as Laplace force acting as an electromagnetic damper. The results obtained were validated by experimental data from the literature and finite element method (FEM) simulations using COMSOL multiphysics. The semi-analytical expressions adoption, the limitation of the mesh to conducting media and the boundaries of magnetic media made it possible to obtain an explicit and accurate model with a considerably reduced computation time compared to the finite element method. Research limitations/implications The modeling adopted explicitly describes the phenomena involved while highlighting optimization parameters. The equivalent circuit’s formulation and the coupling technique used are adaptable to all types of geometry and nonlinear phenomena, which will be the subject of future work. However, the proposed model is limited to axisymmetric configurations and linear electromagnetic phenomena. Originality/value Hybrid approach applied to tubular electric generators, combining the Amperian model for permanent magnets, the CCM method for coils and Fredholm equations for linear ferromagnets.
No takes yet. Share an insight, caveat, or question.
Bouchebbah et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: