Answers are grounded in this paper and cite their sources.
In this study, the effect of reducing zinc content and incorporating carbon nanotubes on the surface, mechanical, and corrosion properties, as well as the environmental impact, of epoxy powder coatings was investigated. A series of coatings with progressively decreasing zinc content and increasing carbon nanotube content was produced using a conventional powder coating manufacturing process, with BaSO4 used to compensate for the reduction in zinc content. The results revealed systematic changes in coating properties depending on their composition. The melt viscosity at 160 °C decreased from 7.21 to 1.54 Pa·s, while surface roughness increased and gloss decreased as the zinc content was reduced. An increase in the water contact angle was also observed, indicating enhanced surface hydrophobicity. Furthermore, surface resistivity decreased from 1.08 × 103 to 0.16 × 103 Ω, indicating improved electrical conductivity of the coating surfaces. As the zinc content decreased, the amount of zinc released into the artificial seawater solution also decreased. Among the compositions investigated, the coating containing 20% zinc and 0.75% single-walled carbon nanotubes (SWCNTs) represented a promising compromise, maintaining corrosion resistance and mechanical properties comparable to those of coatings with higher zinc contents. Further reductions in zinc content resulted in decreased corrosion resistance when the conventional dispersion method was used. The results indicate that incorporating carbon nanotubes is a promising approach to partially replacing zinc in protective powder coatings while simultaneously reducing zinc release into aquatic environments. However, optimizing the nanotube dispersion method to enable greater reductions in zinc content without compromising coating properties may increase production costs.
No takes yet. Share an insight, caveat, or question.
Florczak et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: