Answers are grounded in this paper and cite their sources.
The resistivity increase of copper at the nanoscale due to diffuse electron surface scattering imposes a critical bottleneck for semiconductor technology nodes with <10 nm interconnect half‐pitch. Metallic delafossite oxides PtCoO 2 and PdCoO 2 are promising interconnect candidates with bulk in‐plane resistivities of 2.1 and 2.6 µΩ·cm, respectively, and quasi‐2D cylindrical Fermi surfaces that intrinsically suppress electron‐surface scattering. Electron scattering at PtCoO 2 (0001) and PdCoO 2 (0001) surfaces capped with Si and SiO x layers is quantified using in situ transport measurements on d = 3.1–28.4 nm thick epitaxial films. Si caps increase the delafossite sheet resistance proportional to 1/ d , consistent with an additive surface scattering contribution that is attributed to localized interface states. Subsequent oxidation of the Si cap to SiO x reduces the sheet resistance in all samples, suggesting partial recovery of specularity due to passivation of interface states upon oxidation. A new benchmark quantity, the specific surface scattering resistance R s , is used to compare the promise of delafossite conductors to competing interconnect materials including Cu, Co, and Ru. The results indicate that PtCoO 2 in direct contact with SiO x is particularly promising. Its R s = 1.30 × 10 −16 Ω·m 2 is lower than that of any elemental metal, indicating the potential for liner‐free all‐oxide interconnect architectures.
No takes yet. Share an insight, caveat, or question.
Nishat et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: