Answers are grounded in this paper and cite their sources.
A creep parameter, dynamic excess free energy ∆Gex , is introduced directly from creep data without any adjustable parameters as 2.3RT times (the calculated Larson–Miller constant minus the experimentally obtained one), where R and T have usual meanings. ∆Gex is closely related to dynamic recovery and precipitation. Creep data for 8 kinds of steels of Grades 91, 92, and122 are classified into 257 groups and the ∆Gex s is calculated for each group. Correlations between ∆Gex and creep variables are thoroughly investigated. Among these the relationship between ∆Gex and the activation energy Q with the latter on the horizontal axis is characteristic and behaves like tracing an eighth rest backwards from the start of creep. During the first and second stages of the ∆Gex-Q relationship, precipitation along the boundaries of the hierarchical martensitic structure and the coarsening of precipitates and subgrains, respectively, occur dynamically, although the first stage is absent under high-temperature and long-term creep conditions. During the final stage leading to rupture, damages caused by nonequilibrium vacancies progressively accumulates and ∆Gex increases without exception. Both the hierarchical structure and the high dislocation density cause inhomogeneity in the martensitic steels and consequently result in a pronounced increase in the ∆Gex during creep. ∆Gex can be calculated nondestructively and, therefore, can be used to monitor microstructural changes during creep. Furthermore, the local minimum value of ∆Gex between the second and third stages is highly correlated with the estimated rupture strength at 600 ℃ for 1E5 h. Therefore, ∆Gex can be usefully applied to for the estimation of creep life or residual creep life.
No takes yet. Share an insight, caveat, or question.
Manabu Tamura (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: