Answers are grounded in this paper and cite their sources.
Silicon is a high-capacity anode material for lithium-ion batteries, but the large volume change accompanying lithiation drives structural degradation across multiple length scales. Reducing silicon to a two-dimensional architecture has been explored as a strategy to accommodate lithiation-induced deformation yet whether morphological stability of individual silicon nanosheets translates into dimensional stability of the composite electrode remains unclear. Here, two-dimensional silicon nanosheets (2DSiNSs) are produced directly from commercial silicon micropowder by liquid-phase exfoliation in an IPA/water mixture (1:1 v/v) and integrated within a carbon nanotube (CNT) conductive network. The resulting 2DSiNSs, with an average thickness of 21 nm, retain crystalline silicon character without pronounced additional surface oxidation. Three cells cycled at 0.2C delivered 1932 and 1625 mAh g⁻¹ after 100 cycles and 1520 mAh g⁻¹ at the end of a 117-cycle test, with Coulombic efficiency close to 99% after the initial cycles; the cells differed appreciably in the rate of capacity fade. Differential-capacity analysis shows that the lithiation and delithiation peaks remain recognisable while their amplitudes decrease with capacity. Post-mortem analysis reveals a pronounced cross-scale contrast: cycled 2DSiNSs remain predominantly sheet-like without obvious severe fragmentation despite amorphisation, whereas cross-sectional FIB-SEM shows the local electrode thickness increasing from 3.24 to 13.96 μm after 117 cycles. This cross-scale contrast provides the central observation of the work: preservation of sheet-like morphology does not ensure dimensional stability of the composite electrode.
No takes yet. Share an insight, caveat, or question.
Koutsioukis et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: