Answers are grounded in this paper and cite their sources.
Rock slope stability in open-pit quarries depends on both rock mass quality and the orientation of discontinuities relative to the slope face. This study assesses three andesite slope sectors at the Buluri Quarry, Palu, Indonesia, by combining rock mass classification with limit-equilibrium analyses at the overall-slope and block scales. Field data comprised scanline surveys, UAV photogrammetry, Schmidt hammer tests, and laboratory uniaxial compressive strength tests. The RMR values of Slopes 1, 2, and 3 were 72, 60, and 42; the lowest SMR values were 20, 35, and 16; and the Q-slope values were 0.174, 0.090, and 0.033, corresponding to critical slope angles of 50°, 44°, and 35°. All three existing slopes (55–59°) are steeper than these angles. Overall-slope factors of safety computed with the Barton–Bandis criterion were 1.70, 1.58, and 1.23; however, shallow zones near the slope face had factors of safety as low as 0.28–0.50, and the minimum block-scale factors of safety were 0.80, 0.76, and 0.56. Thus, a satisfactory overall factor of safety does not exclude structurally controlled block failure. Re-profiling the slopes to 50°, 44°, and 36° yielded factors of safety above 1 throughout the modeled sections. Combining empirical classification with limit-equilibrium analysis at more than one scale provides a more complete basis for quarry slope management.
No takes yet. Share an insight, caveat, or question.
Ramadhani et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: