Answers are grounded in this paper and cite their sources.
The accumulation of massive post-consumer poly(ethylene terephthalate) (PET) waste poses severe ecological hazards. Conventional mechanical recycling induces irreversible chain scission and severe property depreciation, while chemical depolymerization consumes excessive energy and toxic solvents, creating a performance-cost downcycling bottleneck limiting high-value PET reuse. This comprehensive critical review highlights vitrimer chemistry based on associative dynamic exchange as a transformative upcycling solution. The field is organized around two fabrication routes—depolymerization-reconstruction and in-situ/direct network construction while preserving the PET backbone—together with a cross-cutting transesterification catalytic dimension covering externally catalyzed, self-catalytic, and metal-free, no-added-catalyst (including residual-catalyst-assisted), and fully catalyst-free designs. Solvolysis-derived oligomers afford vitrimers with tunable glass transition temperature (Tg) (38~240 °C) and tensile strength up to 117 MPa; solvent-free extrusion fits continuous industrial lines, and metal-free designs may reduce heavy-metal contamination. Several optimized systems retain over 80% mechanical performance after cyclic reprocessing, although significant variations exist; for example, the bis(2-hydroxyethyl) terephthalate (BHET)/pyromellitic dianhydride (PMDA)/trimethylolpropane (TMP) vitrimer decreases from approximately 30 MPa to 16 MPa after two compression-molding cycles. These technologies show potential for closed-loop recycling and reprocessability, may reduce virgin resin demand, and may reduce carbon footprints, pending full life-cycle assessment. Major industrial barriers include insufficient creep resistance, incomplete monomer recovery, and non-uniform testing standards. This work delivers integrated theoretical and engineering guidance for scalable PET vitrimer circular-material development.
No takes yet. Share an insight, caveat, or question.
Shuheng et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: