Answers are grounded in this paper and cite their sources.
Underground hydrogen storage (UHS) in porous reservoirs could provide the large-scale storage capacity required for emerging hydrogen economies but mixing with native or cushion gases may reduce hydrogen purity and recovery efficiency. As such, hydrodynamic dispersion is an important transport process, yet experimental measurements under UHS-relevant pressure and temperature conditions remain sparsely reported. This study quantifies hydrogen–carbon dioxide dispersion in porous media using a custom high-pressure miscible core-flooding system with continuous in-line gas-density measurements from a Coriolis mass flow meter and converted to composition through thermodynamic calculations. Hydrogen displacement experiments were conducted in Gray Berea sandstone initially saturated with carbon dioxide at 10.4 MPa and 32°C, using interstitial velocities of 0.256, 0.511, and 1.278 cm/min. Breakthrough curves were analyzed using the Ogata–Banks solution, yielding longitudinal dispersion coefficients of 0.962, 1.271 and 2.128 cm 2 /min. The systematic increase in dispersion coefficient with flow velocity demonstrates the importance of flow-dependent mechanical mixing in hydrogen–cushion gas displacement. Beyond establishing an accessible experimental methodology, this work provides experimental dispersion coefficients that can support reservoir modeling studies evaluating hydrogen purity, cushion gas performance, and storage efficiency in porous formations.
No takes yet. Share an insight, caveat, or question.
Mendez et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: