Answers are grounded in this paper and cite their sources.
Anionic redox in Li- and Mn-rich (LMR) NCMs (Li 1+ δ [TM] 1− δ O 2 , 0.1 ⩽ δ ⩽ 0.2) enables high reversible specific capacities (≈250 mAh g −1 ), but voltage and capacity fading compromise cycle life. Acid washing can mitigate these effects, through partial Li + /H + exchange, subsequently released during heat treatment, leading to an O-depleted near-surface structure. Here, Li 1.14 [Ni 0.26 Co 0.14 Mn 0.60 ] 0.86 O 2 was washed in a phosphate buffer to avoid transition-metal (TM) dissolution and heat-treated at 120–650 °C. Thermogravimetric analysis coupled with mass spectrometry allows to quantify the H + content. Model materials (≈30 at% H + ) were used to track the near-surface structure and TM oxidation states. At 120 °C, X-ray diffraction detects a protonated phase, while X-ray absorption near edge structure reveals a partial shift to spinel coordination (near-surface ½ MO 2 + ½ M 3 O 4 ) at 180–240 °C. At 300 °C, O 2 is released, and further spinel M 3 O 4 is formed, converting to rock-salt MO from 450 °C. Electrochemical tests on 8.7 at% Li + /H + -exchanged samples after 120 °C show a first-charge overpotential due to H + . Only the 450 °C sample exhibits significantly higher impedance across the entire potential range. Despite lower initial capacities, samples heated to 120 °C and 450 °C exhibit superior long-term full-cell C/2 capacity.
No takes yet. Share an insight, caveat, or question.
Kipfer et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: