Answers are grounded in this paper and cite their sources.
Aircraft composite bolted joints may be exposed to a wide range of service temperatures, yet the coupled effects of temperature and assembly conditions on their bearing performance remain insufficiently understood. This study investigated an epoxy-based carbon-fiber-reinforced polymer (CFRP)-to-metal single-bolt double-shear joint designed for a subsonic aircraft. Quasi-static bearing tests were conducted at −55 °C, 25 °C, and 70 °C to determine the ultimate loads and characterize the damage morphologies around the hole. A progressive-damage finite element model was subsequently developed to evaluate the effects of bolt–hole clearance, interference fit, and tightening torque. The mean experimental ultimate load decreased from 17.950 kN at −55 °C to 13.864 kN at 70 °C, representing a reduction of 22.8%. The corresponding relative deviations between the numerical and experimental results were 3.36%, 1.87%, and 0.79%. Bearing damage was the dominant failure mode at all three temperatures; damage propagation was more localized at −55 °C, whereas damage initiated earlier at 70 °C. The simulations showed that a 2% clearance provided relatively high bearing strength, a 2–3% interference fit yielded favorable load-carrying performance, and a 4% interference fit caused pronounced initial damage around the hole. Moderate tightening torque improved the bearing strength at −55 °C and 25 °C, whereas the strength generally decreased with increasing torque at 70 °C. These findings clarify the temperature dependence of assembly effects and provide guidance for the design of composite joints operating over a wide temperature range.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: