Answers are grounded in this paper and cite their sources.
High-index immersion fluids were extensively explored nearly two decades ago as a means of extending the resolution of 193-nm immersion lithography, but their further development was limited by challenges in optical, material, and fluid properties. Here, we revisit this concept with the aim of enhancing imaging performance within the constraints of existing scanner platforms. Aqueous additive systems, including polyols, inorganic salts, and sulfonates, are systematically evaluated in terms of refractive index, transparency, viscosity, and surface properties. Although polyols and inorganic salts exhibit either increased absorption or insufficient transparency at the concentrations required for index enhancement, sulfonate-based systems provide a more favorable balance of optical and fluid properties. Among them, ammonium methanesulfonate (AMS) demonstrates the best overall performance, with a refractive index of 1.525 at 50% concentration while maintaining high transmittance at 193 nm, low viscosity, and favorable wetting behavior. AMS also shows no measurable increase in resist leaching and maintains stable optical performance under irradiation. Optical lithography simulations further show that AMS improves optical matching by reducing reflection, particularly for the dominant transverse electric component, and provides increased depth of focus while maintaining a comparable peak normalized image log slope relative to water. These advantages persist at numerical apertures up to 1.45, supporting the potential of AMS-based aqueous solutions as a practical route toward high-numerical-aperture 193-nm immersion imaging beyond the conventional water-immersion limit.
No takes yet. Share an insight, caveat, or question.
Xin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: