Answers are grounded in this paper and cite their sources.
Microalgae oil was extracted from dried algal biomass using N-hexane Soxhlet extraction and was directly mixed with conventional diesel at different volumetric concentrations without undergoing transesterification. We experimentally tested the prepared microalgae oil diesel blends in a single-cylinder compression-ignition engine under different load conditions. Engine performance is evaluated by means of brake thermal efficiency, brake-specific fuel consumption, indicated mean effective pressure, exhaust gas temperature and fuel consumption, as well as selected exhaust emissions. In this article, aim is to investigate the extraction process of microalgae oil, its blending properties with diesel fuel, and evaluate its engine performance. The microalgae oil extracted through a solvent extraction method, and its physicochemical properties are analyzed. The blending characteristics of directly extracted microalgae oil with diesel fuel were evaluated, and the most suitable blend ratio was identified based on the measured fuel properties and engine performance. The engine performance will be evaluated in terms of brake thermal efficiency, brake specific fuel consumption. The results are shown will provide valuable insights into the feasibility of using microalgae oil as a renewable fuel source and its potential as a sustainable alternative to fossil fuels. The oil yield and the main fuel properties (density, kinematic viscosity, calorific value, flash point and cetane index) of the extracted oil and the blends are also reported.
No takes yet. Share an insight, caveat, or question.
P.V et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: