Answers are grounded in this paper and cite their sources.
In complex engineering geological environments, rock masses are subjected to the long-term coupled effects of geostress and groundwater seepage, and their permeability characteristics play a critical role in engineering stability. Taking limestone from the engineering site as the research material, through-going single-fracture specimens with different fracture roughness levels were prepared using the Brazilian splitting method. Three-dimensional laser scanning of fracture morphology and multicondition single-fracture seepage tests were conducted. A systematic method for characterizing the 3D roughness of fracture surfaces was established, and the combined effects of confining pressure, seepage pressure, and fracture roughness on the permeability coefficient were investigated. The results indicate that (1) the single-fracture seepage in each designed test condition is in a laminar flow state, and the fracture permeability coefficient can be calculated using the cubic law. (2) The fracture roughness can be quantified using the surface roughness ratio Rs and the root-mean-square of the first derivative Z2, and their consistency indicates that Z2 can serve as an equivalent roughness descriptor relative to Rs. (3) Under confining pressures of 2.0 and 5.0 MPa and at injection flow rates of 2.0 mL/min and 3.0 mL/min, the permeability coefficient of the fractures increased significantly with increasing fracture roughness. The permeability coefficient was negatively correlated with confining pressure, and its variation with increasing confining pressure could be divided into three stages: “rapid decrease–gradual decrease–quasi-stable”. A positive correlation was observed between the permeability coefficient and the ratio of flow pressure Q/ps. (4) Based on data fitting, a quasi-exponential relationship among the permeability coefficient, effective stress, and fracture roughness was established, quantitatively characterizing the coupled interaction between the stress field and seepage field. These findings provide a theoretical basis for evaluating seepage stability in rock engineering.
No takes yet. Share an insight, caveat, or question.
He et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: