Answers are grounded in this paper and cite their sources.
The utilization of agricultural waste-derived materials in pavement and cementitious systems has attracted increasing attention as a strategy for improving sustainability while reducing environmental burdens associated with conventional construction materials. This study investigated the performance of coffee biochar-modified cement mortar as a grouting material for semi-rigid pavement systems incorporating basalt and limestone aggregates. Coffee biochar produced from spent coffee grounds pyrolyzed at 350 °C was incorporated at a fixed replacement level of 15% of fine aggregate. The effects of aggregate type, water–cement ratio (0.50 and 0.55), and superplasticizer dosage (0%–2%) on flowability, compressive strength, mortar saturation, and microstructural characteristics were evaluated. Mechanical and physicochemical performance were assessed using compressive strength testing together with Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), and Scanning Electron Microscopy coupled with Energy Dispersive X-ray Spectroscopy (SEM–EDX). The results demonstrated that all mixtures achieved flowability values suitable for grouting applications, while mortar saturation exceeded 90% for both basalt and limestone porous asphalt systems, indicating effective infiltration into the interconnected void structure. The highest 28-day compressive strength of 56.99 MPa was obtained for the limestone mixture with a water–cement ratio of 0.50% and 0.8% superplasticizer dosage. Microstructural observations revealed differences in pore distribution, interfacial transition zone characteristics, and hydration product morphology among the investigated mixtures. FTIR, XRD, and SEM–EDX analyses suggested the development of hydration products and matrix densification, although direct quantification of hydration phases was beyond the scope of the study. The findings indicate that coffee biochar-modified cement mortar can provide satisfactory fresh, mechanical, saturation, and microstructural performance for semi-rigid pavement applications when mixture proportions are appropriately selected. However, the study was limited to a single coffee biochar replacement level (15%), one pyrolysis temperature (350 °C), and laboratory-scale short-term evaluation. Future studies should include biochar-free control mixtures, different biochar dosages, long-term durability assessments, and field-scale validation to confirm the applicability of coffee biochar-modified grouting mortars in semi-rigid pavements. The FTIR, XRD, and SEM results should be interpreted cautiously due to their inherent limitations, and further microstructural investigations are recommended to strengthen the findings.
No takes yet. Share an insight, caveat, or question.
Hepautwa et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: