Answers are grounded in this paper and cite their sources.
Compared with their rigid counterparts, the dual-link flexible robotic manipulator (DLFRM) features lighter links, lower inertia, and higher deployment flexibility. However, joint coupling and link elasticity introduce complex nonlinear dynamic characteristics that complicate the modeling process. To conduct a comprehensive analysis of the dynamic characteristics of the DLFRM, this study proposes a low-dimensional dynamic modeling method based on the global modal method (GMM). A corresponding nonlinear response analysis framework is established. The proposed approach incorporates the linearized dynamic equations and boundary conditions into the global modal formulation and represents the elastic deformations of both links using a unified set of global modal coordinates, resulting in a low-dimensional dynamic model of the DLFRM. The modal characteristics predicted are validated by comparing the natural frequencies (NFs) and mode shapes with those obtained from finite element method (FEM) analysis. The convergence analysis of the system response indicates that the first two global modes are sufficient to achieve accurate predictions of the system response. Moreover, the GMM provides a more stable elastic response, while achieving a computational efficiency of approximately 15.6% in both total and per-step computational cost, compared to that of the assumed mode method (AMM). The proposed model is further validated in terms of its modal characteristics and system response through impact-hammer tests and dynamic-response measurements. This study presents a new approach to DLFRM dynamic modeling and lays the foundation for system dynamic modeling, response analysis, and vibration suppression. Furthermore, the proposed approach can be extended to multi-link flexible manipulator systems.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: