Answers are grounded in this paper and cite their sources.
Growing environmental concerns and the rapid depletion of fossil fuels have accelerated the need for sustainable energy storage systems. This research reports converting waste polyethylene terephthalate (PET) into terephthalic acid (BDC) and then using it as an organic linker to synthesize a nickel-coordinated metal-organic framework (Ni-BDC) for supercapacitor applications. The BDC ligands extracted from PET via alkaline hydrolysis were analyzed to confirm their structural and crystalline properties with commercial terephthalic acid. Using a simple one-step co-precipitation method, the Ni-BDC MOF was synthesized and characterized using UV–Visible spectroscopy, Fourier-Infrared spectroscopy, X-ray diffraction, Raman spectroscopy, Field-emission scanning electron microscopy, X-ray photoelectron spectroscopy (XPS), and Brunauer–Emmett–Teller (BET) surface area analysis. These characterization results confirmed the formation of a highly crystalline coordination framework with bidentate carboxylate bridging between Ni2+ ions and PET-derived ligands. The electrochemical performance was evaluated in 1 M KOH electrolyte using a three-electrode and a symmetric two-electrode configuration. In the three-electrode configuration, the Ni-BDC electrode showed a maximum specific capacitance of 1118 F g−1 at a current density of 1 A g−1, which decreased to 129 F g−1 at 10 A g−1. Electrochemical impedance spectroscopy revealed a solution resistance (Rs) of 3.6 Ω, while the inclined Nyquist response indicated non-ideal capacitive characteristics. Furthermore, the symmetric two-electrode device exhibited specific capacitances of 36.36 and 4.83 F g−1 at current densities of 0.5 and 10 A g−1, respectively. The device retained 67% of its capacitance after 8000 galvanostatic charge-discharge cycles at 15 A g−1, with a coulombic efficiency of approximately 100.1%. These findings demonstrate the feasibility of using waste PET-derived terephthalic acid to develop functional Ni-BDC electrode materials and offer a potential pathway to integrate plastic waste valorization with electrochemical energy storage applications.
No takes yet. Share an insight, caveat, or question.
Dutta et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: