Answers are grounded in this paper and cite their sources.
Sandwich T-joints carry the out-of-plane loads of composite ships, and their failure develops internally, beneath intact surfaces, so structural continuity can degrade without visible warning. This study combines cyclic and ultimate load tests with a progressive-damage finite-element model of a GFRP/PVC-foam sandwich T-joint whose trapezoidal toe region concentrates a multiaxial stress state under bending. To the authors’ knowledge, physically based criteria of the Puck/LaRC/Pinho type have not previously been applied to a joint of this complexity as a coupled tensile and compressive treatment. A tensile criterion that distinguishes matrix tensile damage from fiber fracture and a modified LaRC03#6 fiber-kinking criterion, both within a hybrid stiffness-degradation scheme, were applied in a single model. The model reproduces the measured initial stiffness, about 200 N/mm against about 210 N/mm, and predicts an ultimate capacity of 3920 N against tested 3822 and 3915 N, errors of +2.6% and +0.1%, and it resolves the full damage sequence, PVC yielding at 2026 N, first fiber kinking at 2673 N, matrix tensile damage at 3173 N, fiber-kinking breakage at 3712 N, and collapse after roughly 56 mm of loading-point displacement. Unlike Hashin-type treatments, which typically report only the final failure mode, the coupled criteria can reproduce gradual distributed damage and abrupt collapse in one analysis, which provides the damage sequence with its load levels for the design of safer composite marine structures.
No takes yet. Share an insight, caveat, or question.
Qin et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: