Answers are grounded in this paper and cite their sources.
The rising demand for reinforcement raw materials that are both sustainable and lightweight has paved the way for identification and exploitation of underutilized lignocellulosic fibers as alternative reinforcements to conventional synthetic reinforcements. In this paper, the primary focus was on the Bauhinia racemosa bark fiber before and after alkaline treatment, in order to conduct an in-depth analysis of the sustainable reinforcement potential of the fiber for polymer composite applications. The extracted fibers were subjected to 5% (w/w) NaOH treatment at 80 °C for 2 h, followed by neutralization with acetic acid, washing, and drying. The effect of alkaline treatment on fiber recovery, component analysis, physical dimensions, functional groups, structural order, surface texture, thermal behavior, and tensile properties was thoroughly assessed. The treated fiber exhibited a 60% recovery, corresponding to a 40% mass reduction, indicating substantial modification and removal of surface-associated and non-cellulosic constituents. The fiber diameter decreased from 52 to 34 μm (34.6%), while the density decreased from 1.18 to 1.02 g cm−3 (13.56%), demonstrating significant dimensional modification and fibrillar separation. FTIR analysis confirmed changes in characteristic lignocellulosic functional groups, while XRD analysis revealed modification of the cellulose-rich structural organization following treatment. SEM observations demonstrated a cleaner, rougher and more fibrillated surface, indicating increased exposure of the underlying fibrillar structure. TGA demonstrated a modified thermal degradation profile following alkaline treatment, supporting the potential of the treated fiber for polymer-processing environments under suitable conditions. Most notably, the mean maximum tensile force increased from 1410 ± 1010 gf to 4180 ± 1870 gf, corresponding to an approximately 196% improvement, while elongation at maximum force increased from 4.4 ± 1.4% to 6.9 ± 1.9%. At the fiber level, the treated fiber thus has potential as a lightweight, renewable and chemically tunable reinforcement for sustainable polymer composites, particularly for non-load-bearing and semi-structural applications. However, no composite or product-level testing was conducted in this study. Composite fabrication and interfacial characterization are needed to validate the reinforcement performance. The combined results indicate a clear relationship between alkaline modification, structural alteration and improved mechanical response of B. racemosa fiber under the present single-batch conditions. Further composite-level studies are required to validate fiber–matrix interfacial adhesion, durability, moisture resistance and long-term performance.
No takes yet. Share an insight, caveat, or question.
Saravanan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: