Answers are grounded in this paper and cite their sources.
Valorizing fine steelmaking co-products into higher value-added materials represents a strategic pathway to enhance circularity within the steel supply chain and reduce liabilities associated with industrial waste disposal. In this study, we incorporated seven steelmaking co-products as a fine fraction into polymer-matrix agglomerated stone production, combined with commercial mineral fillers, using vacuum-assisted thermal compaction. We determined formulations based on particle packing, statistically selected mixtures yielding the highest vibrated density, and adjustments to polyester resin content. We evaluated the resulting slabs for physical properties, flexural strength, fracture microstructure, AMSLER abrasive wear resistance, chemical resistance, UV/condensation surface stability, and dilatometry. The best performance was achieved with compositions combining electrostatic precipitator dust with sedimentary rock (travertine) and sintering bag-filter dust with magmatic rock (Siena white granite). The former showed the lowest porosity and water absorption, as well as the best abrasive wear performance, while the latter achieved the highest flexural strength of the group, exceeding 26 MPa. Formulations incorporating fine steel mill sludge, Kanbara reactor dust, and blast furnace dust showed intermediate performance, indicating potential for protected indoor applications. Blast furnace sludge proved the most problematic and required reformulation. The results show that fine steelmaking co-products can be successfully valorized in agglomerated stone products, provided the co-product, mineral filler, particle packing, and polymer matrix are compatible.
No takes yet. Share an insight, caveat, or question.
Reis et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: