Answers are grounded in this paper and cite their sources.
Summary Accurate predevelopment pore pressure prediction is critical for reservoir evaluation, development optimization, and safe exploitation in ultradeep oil and gas reservoirs. Traditional empirical models, such as the Eaton and Bowers methods, often fail in tight carbonate formations because they typically predict a monotonic decrease in overpressure as porosity declines, which contradicts field observations of abnormally high pressure in low-porosity regimes. To address this issue, we developed a new poroelasticity-based mechanical model derived from poroelastic theory and the solid/fluid stress balance equation. The proposed model captures pore pressure evolution through the coupled mechanical response of the rock skeleton and pore fluid under geologic confinement, leading to an explicit constitutive equation for induced overpressure. Unlike traditional methods, the proposed model incorporates geomechanical parameters with clear physical meanings, such as elastic modulus and Poisson’s ratio; the core mechanical formulation is governed by physically interpretable geomechanical parameters rather than empirical fitting coefficients. The method was validated using seismic inversion data from ultradeep wells in the Tarim and Sichuan Basins, China. Results demonstrate high predictive accuracy, with a maximum absolute error of only 0.12 g/cm³ between the predicted and measured values. Furthermore, sensitivity analysis and laboratory experiments confirm that overpressure decreases with increasing elastic modulus and increases with higher Poisson’s ratio due to the squeezing effect. This study provides a robust theoretical framework and a practical workflow for predevelopment pore pressure characterization, geomechanical evaluation, and integrated engineering decision-making in heterogeneous ultradeep tight carbonate formations.
No takes yet. Share an insight, caveat, or question.
Lu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: