Answers are grounded in this paper and cite their sources.
In this work, we propose a model-based feedback controller that regulates the vertical instability growth rate (γgr ) of a high-elongation, double-null tokamak directly, using only out-vessel poloidal field (PF) coils. High elongation raises the achievable plasma current and fusion performance but makes the plasma vertically unstable, and in a fusion power plant the in-vessel coils that present devices rely on for stabilization may be absent, leaving only distant out-vessel circuits. The controller couples a machine learning surrogate of non-rigid, profile agnostic vertical instability metric to a constrained quadratic program: the surrogate supplies real-time γgr estimates and, via automatic differentiation, the actuator sensitivities, while the program allocates coil voltages to track a target growth rate, maintain double-null divertor balance, and respect electromechanical limits. We tested this method on the ARC V3A power plant design configuration across 24 closed-loop simulations spanning equilibrium variations, actuator degradations, and transient disturbances. We achieved full or marginal success in 83% of these cases (full in 50%, marginal in a further 33%) and lose control in the remaining 17%; the failures map the boundary of out-vessel controllability (occurring at the highest growth rates) and under actuator limits. The controller does not regulate boundary shape explicitly: separatrix geometry follows indirectly from growth rate and flux balance control and would require a separate shape control layer for sustained scenario evolution.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: