Answers are grounded in this paper and cite their sources.
The hydro-thermo-mechanical state and deformation of reinforced soil retaining walls in seasonally frozen regions evolve continuously under sequential freeze–thaw action and traffic loading. In a 1:4 laboratory-scale model test, the same retaining wall model underwent three freeze–thaw cycles without an external water supply. The F1 and F2 loading stages were conducted during thawing in the second and third cycles, respectively. In each stage, sinusoidal dynamic loads were applied in a fixed sequence of 1, 4, and 7 Hz. Temperature, water content, earth pressure, acceleration, and wall-facing displacement were recorded synchronously. During freezing, the subzero-temperature zone extended into the wall from the top surface and the facing side, forming an approximately L-shaped pattern. During thawing, the boundaries warmed before the wall interior. By the end of the first thawing observation period, the subzero-temperature zone had disappeared from the monitored cross-section, but the vertical additional earth pressure at a depth of 150 mm remained at approximately 47% of its peak during the preceding freezing stage, indicating that additional earth pressure recovery lagged behind warming. The increases from F1 to F2 in vertical additional earth pressure increments and acceleration responses occurred mainly in the upper part of the wall and coincided with further outward displacement of the upper facing. At an elevation of 650 mm, wall-facing displacement at the end of freezing increased from approximately 0.42 mm in the first cycle to approximately 1.10 mm in the third cycle. The wall-facing deformation gradually evolved from predominantly local bulging in the middle portion to a combination of overall outward tilting and local bulging.
No takes yet. Share an insight, caveat, or question.
g et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: