Answers are grounded in this paper and cite their sources.
Platelet enrichment is an important step in preparing blood samples for platelet analysis, motivating the development of continuous and controllable separation methods. Platelet analysis strongly depends on sample preparation. Conventional centrifugation-based platelet isolation requires repeated centrifugation and manual handling, while filter-based microfluidic technologies can suffer from clogging and mechanical stress that may cause platelet activation and sample loss. In this study, we developed an acoustofluidic chip for continuous platelet isolation and enrichment from diluted blood samples. Platelet-containing plasma is sequentially displaced toward the collection outlet through four serial lateral flow replacement units, while larger blood cells are confined to the central channel by a standing acoustic wave field that serves as a virtual filter. This design enables separation without membranes or obstructive filtration structures. In model-particle experiments conducted at a sample flow rate of 300 μL min-1, the recovery rate of 5 μm particles and the removal rate of 15 μm particles reached 90.34% and 94.02%, respectively. Platelet separation was further demonstrated using 10-fold diluted rat blood at a sample flow rate of 300 μL min-1, corresponding to a whole-blood-equivalent throughput of 30 μL min-1. The platelet-to-leukocyte ratio increased from 4.82 : 1 to 58.91 : 1 after separation. These results demonstrate continuous platelet enrichment relative to leukocytes, thus it is of potential to benefit the platelet-based liquid biopsy.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: