Answers are grounded in this paper and cite their sources.
Peroxymonosulfate (PMS)-activated advanced oxidation processes (AOPs) are promising for the removal of refractory azo dyes, and the catalytic performance of Co3O4 strongly depends on its surface and microstructural characteristics. Herein, Co3O4 microspheres were prepared by a solvothermal-annealing route, and their microstructures were regulated by varying the annealing temperature from 350 to 650 °C without changing the spinel phase. Increasing the annealing temperature induced progressive nanoparticle coarsening and decreased the BET specific surface area from 7.68 m2 g-1 for Co3O4-350 to 1.08 m2 g-1 for Co3O4-650. Among the samples, Co3O4-350 exhibited the highest PMS activation activity, achieving 99.1% removal of Ponceau Red 2R (PR) within 3 min with an apparent pseudo-first-order rate constant of 1.6693 min-1. Quantitative comparison with representative Co3O4-based PMS activation systems reported in the literature further demonstrates the competitive kinetic performance of Co3O4-350, with a catalyst-mass-normalized apparent rate constant of 5.5643 L g-1 min-1. Radical quenching experiments and EPR measurements support the involvement of SO4˙-, ˙OH, O2˙-, and 1O2 in the oxidation process. Co3O4-350 also retained 93.7% PR removal after eight consecutive cycles. These results show that simple annealing-temperature regulation can effectively tune the accessible surface structure of compositionally unmodified Co3O4 and provide a competitive route for PMS activation toward azo-dye degradation.
No takes yet. Share an insight, caveat, or question.
王爱丽 et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: