Answers are grounded in this paper and cite their sources.
Compressed earth bricks (CEBs) represent a promising class of earthern construction materials; however, their hygrothermal performance remains strongly dependent on mineral composition and stabilization strategy. This study investigates the coupled heat and mass transfer behavior of kaolin-modified CEBs and their stabilization using cement and lime. Particular attention is given to the relationship between microstructural evolution, moisture transport, and thermal properties. Kaolin was incorporated into a natural soil matrix at proportions ranging from 0 to 50 wt%, followed by stabilization of selected mixtures (20 wt% kaolin) with cement or lime (0–8 wt%). After 28 days of curing, the materials were characterized in terms of mechanical properties, density, thermal conductivity, specific heat capacity, and sorption behavior in accordance with standardized procedures. Results indicate that increasing kaolin content leads to a significant reduction in compressive strength (2.70–0.96 MPa) and stiffness (326–150 MPa), associated with the absence of pozzolanic reactions and the increase in fine clay fraction. In contrast, thermal conductivity decreases from 0.479 to 0.403 W·m⁻¹ ·K⁻¹ due to enhanced porosity and reduced bulk density, improving insulation performance. Cement stabilization promotes the formation of cementitious phases, resulting in improved load-bearing capacity (≈ 3.30 MPa at 3 wt%) and increased stiffness (≈373 MPa). Lime stabilization, while less effective mechanically at early age, enhances thermal inertia through a marked increase in specific heat capacity (389–620 J·kg⁻¹·K⁻¹). Moisture sorption analysis reveals Type IV isotherms with pronounced hysteresis, reflecting mesoporous structures and complex adsorption–desorption mechanisms. The Peleg and double-polynomial models accurately capture the nonlinear sorption kinetics. These results demonstrate that kaolin-based stabilization significantly alters the coupled heat and moisture transfer processes in CEBs, offering a pathway toward optimizing hygrothermal performance and energy efficiency in sustainable building applications.
No takes yet. Share an insight, caveat, or question.
Bahammou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: