Answers are grounded in this paper and cite their sources.
Biobased films are increasingly explored for applications such as sustainable packaging to replace fossil-based materials. In this study, the production of lignin-based films from light-colored thioacidolysis lignin is demonstrated. Lignin was isolated from softwood under mild conditions (120 °C, 2 h), and its high content of carboxylic acid groups enabled the preparation of lignin-containing films with two biobased diglycidyl ethers, namely glycerol diglycidyl ether (GDGE) and sulfanediyldifuran diglycidyl ether (SDFGE). At a thioacidolysis lignin content of 60 wt%, transparent and ultraviolet light–blocking films were obtained. Both films exhibited high tensile strength and excellent thermal stability, with onset degradation temperatures of approximately 250 °C or higher. In addition, the films showed good barrier properties against water vapor and oxygen at a relative humidity (RH) of 50%. Notably, the SDFGE-based film retained favorable barrier performance even at 90% RH, indicating the formation of a moisture-tolerant lignin-based network enabled by rigid, aromatic crosslinking units. These results demonstrate that thiolactic acid–based fractionation is an effective strategy for producing functional lignin suitable for high-performance biobased films. The properties of the materials can be tuned through the selection of the diglycidyl ether, offering a versatile platform for the development of sustainable film materials.
No takes yet. Share an insight, caveat, or question.
Sirviö et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: