Answers are grounded in this paper and cite their sources.
The search for accessible and efficient solar water heating systems is critical in rural and high-Andean areas with limited access to conventional energy sources. This study experimentally evaluates the thermal performance of a low-cost solar water heater incorporating a 1.2596 m2 serpentine CPVC collector under high-Andean climatic conditions in Peru. A prototype featuring a 1.2596 m2 horizontal serpentine CPVC collector was designed and monitored over 30 consecutive days using an Arduino system with four temperature sensors. Thermal efficiency was evaluated under three usage scenarios: daytime use, nighttime use, and no use. When water was used during the day, average efficiency reached 27.71%, with a maximum of 40.53%, and an average temperature drop of 1.62 °C due to cold water entering the tank. In nighttime use, average efficiency was 26.22%, peaking at 44.71%; however, the instantaneous thermal effect of nighttime withdrawal was not directly monitored. When the water was not used, efficiency remained more stable, averaging 28.70% with a maximum of 34.50%, with no statistically significant differences among usage patterns (p > 0.05). Maximum outlet temperatures reached 43.4 °C, even under variable solar radiation (1.69 to 6.32 kWh/m2). Daily solar energy was strongly correlated with collector (r = 0.879, p < 0.001) and outlet temperatures (r = 0.868, p < 0.001), while a significant but lower correlation was observed with storage-tank temperature (r = 0.683, p < 0.001). The results provide experimental evidence on the feasibility and operational limitations of low-cost CPVC solar water heating systems under high-altitude and highly variable solar conditions.
No takes yet. Share an insight, caveat, or question.
Gomez et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: