Answers are grounded in this paper and cite their sources.
The Coefficient of Friction (CoF) at the wheel-rail interface critically influences train traction and braking performance, and thereby inter-train distance and track utilisation. Reliable measurement of the CoF experienced by in-service trains is therefore desirable to optimise railway operational schedules and maximise track capacity. This study presents a novel train-borne CoF measurement method based on a torque-modulation concept. The proposed method requires neither wheel sliding nor challenging train-borne creepage measurements, and does not rely on creep-force models, thereby addressing the limitations of current methods. A small-amplitude sinusoidal signal is superimposed on the motor torque. The wheel-rail friction force acts as variable damping, producing a phase difference between the input modulated torque and the angular speed response of the wheelset. This phase difference is correlated with the wheel-rail creep coefficient, i.e. the slope of the creep curve, and a threshold on the phase difference is determined to indicate the proximity of the operating point to friction saturation. As the torque is increased, the phase difference increases until this threshold is reached, and the corresponding CoF is output as the measurement. The method is evaluated in an ADAMS/VI-Rail-MATLAB/Simulink co-simulation environment, with results indicating accurate and robust performance across varied friction conditions.
No takes yet. Share an insight, caveat, or question.
Krishnan et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: