Answers are grounded in this paper and cite their sources.
Friction-transfer printing has been an excellent technique for achieving thin-film formation of conjugated polymers. In this study, we attempted to fabricate friction-transferred films of small-molecule and inorganic materials that had previously been difficult to transfer. Tris(8-hydroxyquinolinato)aluminum (Alq3) or titanium dioxide (TiO2) powders were mixed with polymeric binders, followed by compression with a hydraulic press to form composite pellets. Friction-transfer printing using the mixed pellets enabled the formation of Alq3 and TiO2 thin films. Notably, the friction-transfer printing process itself operates below 100℃, although a post-annealing treatment at 300℃ can be applied to remove the polymeric binder. As a demonstration of device application, the friction-transferred TiO2 film was successfully implemented in an inverted organic photovoltaic cell. The friction-transfer technique is characterized by low-temperature operation below 100C and extremely short processing times of only a few seconds, suggesting its potential as a novel film-deposition technique for functional materials.
No takes yet. Share an insight, caveat, or question.
Misaki et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: