Answers are grounded in this paper and cite their sources.
Nonlinear contact finite element models of foam-shaped and spherical soluble pigs in a DN100 gas-gathering pipeline were established using common two-parameter Mooney–Rivlin material parameters and pipe dimensions. Displacement-controlled analyses examined the effects of interference and friction on contact pressure distributions, while local contact region changes during weld passage were discussed. Pressure-driven analyses determined numerical start-up pressure differences using a prescribed contact status criterion. Within the investigated conditions, increasing interference raised the contact pressures for both geometries. Increasing friction altered axial pressure distributions and reversed the ranking of the mean contact pressure. The numerical start-up pressure differences increased with interference and friction and were higher for the foam-shaped pig under the investigated nonzero-friction conditions. Contact pressure levels, load distributions, and the driving requirement for reaching the prescribed sliding state should therefore be considered together. These comparisons apply to the adopted material description, loading procedures, and initial undissolved state; quantitative engineering application requires further validation.
No takes yet. Share an insight, caveat, or question.
Qu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: