Answers are grounded in this paper and cite their sources.
Large quantities of shredded high-density polyethylene (HDPE) plastic bits are generated in Kuwait as a by-product of the manufacturing of plastic pipes. Recycling and beneficial use of this waste material is important considering the shortage of disposal sites and for environmental protection. Toward this goad an extensive laboratory testing program was carried out to examine the use of HDPE plastic bits as an additive to the remolded clayey sand (locally known as gatch soil). This soil is naturally cemented but upon excavation it transformed into clayey sands with fines content of 20 to 40%. Testing included basic properties, Modified Proctor Compaction, permeability, direct shear, consolidation, and CBR tests. HDPE plastic bits was used as an additive in the amount of 0, 10%, and 20% by weight. All tests were carried out on samples prepared at maximum density and optimum moisture content. Moreover, model tests were carried out on a 70 mm circular metal plate resting on clayey sand with 0, and 10% HDPE plastic additive and compacted to 95% relative compaction. The purpose being to examine the effect of HDPE plastic additive on the ultimate bearing capacity and settlement of shallow foundations. Test results indicated that the use of HDPE plastic bits as an additive resulted in a light weight more compressible material with higher strength parameters and minor reduction in permeability. The bearing capacity decreased substantially with the addition of HDPE bits and the settlement increased at the applied working loads.
No takes yet. Share an insight, caveat, or question.
Ismael et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: