Answers are grounded in this paper and cite their sources.
Accurate wellhead backpressure regulation is essential for maintaining bottomhole pressure within a narrow operating window during managed pressure drilling (MPD). This study integrates a wellbore hydraulics calculation with nonlinear active disturbance rejection control (NADRC) tuned using a whale optimization algorithm with a global search strategy (GSWOA). The hydraulic calculation was assessed using field data from well TZ62-11H, with a reported range-based mean relative error of 8.61% and interval-level errors of 3.35–13.76%. A hyperbolic-tangent-based tanhfal function was introduced into the nonlinear extended state observer. Under zero initial observer error, it reduced the ITSE of state estimation and state-derivative estimation by 52.58% and 51.28%, respectively. With an initial observer error of 0.5, the corresponding reductions were 19.77% and 88.53%, and the derivative-estimation peak was suppressed. The NADRC parameters were tuned using an overshoot-weighted ITSE objective. Under the plant parameter variations, disturbances, and measurement-noise cases specified in the main study, tanhfal-based NADRC produced lower overshoot and ITSE than the two PID baselines. A separate supplementary delay study using conventional tanhfal further showed a trade-off between smaller positive overshoot and larger ITSE. Field data assessed the hydraulic reference calculation, while closed-loop simulations evaluated controller performance.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: