Answers are grounded in this paper and cite their sources.
The significant green-house gas (GHG) emission and environmental impact from the steel industry requires its transition to green steel if the 2050 global net zero ambitions are to be achieved. The current major steel production route i.e. blast furnace–basic oxygen furnace (BF-BOF), which generates approximately 2.34 metric tonnes of CO 2 per metric ton of steel produced, needs to be carefully looked at or replaced with more environmentally friendly routes. There has been progress in reducing GHG emissions in current infrastructure and technologies; however, to achieve zero emissions, a fundamentally different extractive metallurgical process is required. Direct electrochemical reduction (DER) is one of the alternatives that is gaining interest, with several routes therein currently being commercially developed. The electrolytic reduction pathways, however, have technical and operational challenges that must be overcome for technology maturity to provide a feasible and economic solution. Nevertheless, considering the scale of the steel industry, and the short timeframe to achieve viable decarbonization solutions, the active development of alternative reduction routes such as DER should be a priority; in particular, in niche markets where they may be more suitable for particular ore types and/or high purity iron applications. This paper reviews and provides an objective assessment of the viability and technical challenges of DER approaches, including high- and moderate-temperature approaches (molten oxide and molten salt electrolysis) and low-temperature acid- and alkaline-based approaches. The paper gives a technical knowledge base to guide decision-making for future strategic research and development on DER technologies for the production of green iron.
No takes yet. Share an insight, caveat, or question.
Neville et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: