Answers are grounded in this paper and cite their sources.
Research on the shear buckling of composite girders with corrugated steel webs (CGCSWs) has long been confined to prismatic members, so that both the buckling mechanism and the analytical critical stress of non-prismatic girders have remained framed within the prismatic assumption. This study examines how, in non-prismatic girders, the vertical component of the axial force in the inclined concrete bottom flange participates in resisting the external shear and thereby drives a longitudinal redistribution of the shear flow along the span, which can shift the section of maximum web shear stress and the likely initiation site of shear buckling away from the fixed-end support toward the loading region. Starting from vertical section equilibrium, an explicit force-path relation is derived and used to reassess the critical location, and the local critical shear buckling stress is evaluated with an energy-based approach that incorporates the rate of section-height variation along the span. An idealized finite-element assessment and a qualitative comparison with a reported test observation are used to check the direction of the predicted redistribution and critical-section migration. For the studied geometry, the results indicate that current design practice may misidentify the critical location and may overestimate the local buckling demand at the actual critical section. However, the evidence supports a scoped reassessment rather than a general design rule. The study provides a theoretical basis and identifies the experimental and parametric work required before design application.
No takes yet. Share an insight, caveat, or question.
Bai et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: