Answers are grounded in this paper and cite their sources.
Shale oil reservoirs contain abundant nanopores, where nanoconfinement modifies fluid phase behavior and CO2-induced phase transitions. To characterize these effects, a modified Peng–Robinson equation of state (PR-EOS) incorporating wall adsorption, critical property shifts, and vapor–liquid capillary pressure was developed for two-phase flash and phase-envelope calculations. The multiple mixing-cell (MMC) method was used to determine CO2–oil minimum miscibility pressure (MMP). Using this framework, pure fluids were examined for critical property shifts, while light and heavy model oils were used to assess how pore radius, oil composition, and CO2 enrichment affect phase behavior and miscibility. Results show that nanoconfinement intensifies as pore radius decreases, lowering the critical temperatures and pressures of fluids and shifting their phase envelopes toward lower temperatures and pressures. At 5 nm, the critical temperatures of light and heavy model oils decrease by 14.63 and 17.11%, respectively, while their critical pressures decrease by 31.82 and 33.71% relative to bulk values. Meanwhile, increasing CO2 content lowers critical temperatures but raises critical pressures, whereas nanoconfinement reduces both properties relative to bulk conditions at the same CO2 content. Moreover, the MMP decreases with decreasing pore radius: at 373.15 K and 5 nm, the MMPs of light and heavy oils are 9.38 and 12.13 MPa, respectively, which are 27.8 and 25.0% below bulk values. Finally, application to a field shale oil reservoir highlights the importance of pore-radius distribution. Distribution-weighted bubble-point pressures before and after 50% CO2 injection and the CO2–oil MMP are 19.5, 16.2, and 14.0% lower than estimates based on the mean pore radius, respectively.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: