Answers are grounded in this paper and cite their sources.
Natural fibers can reduce the environmental impact of cementitious composites, but their extractives and hygroscopicity may also create chemically and mechanically heterogeneous fiber–matrix interfaces. This study decouples the chemical effect of sisal extractives from the physical effect of water sorption by comparing raw sisal fibers (RSF) and water-extracted sisal fibers (WSF) in CEM I cement pastes. A multiscale methodology combining calorimetry, Vicat setting, nuclear magnetic resonance (NMR) relaxometry, scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDS), inductively coupled plasma optical emission spectroscopy (ICP-OES), thermogravimetry, micro-computed tomography (micro-CT), pull-out testing and targeted microindentation was used to link ion uptake and water mobility to the local mechanical response of the interfacial transition zone (ITZ). Raw fibers strongly delayed setting and hydration, whereas water-extracted fibers mainly modified local water availability. ICP-OES supported stronger calcium uptake by RSF, and SEM/EDS revealed pronounced elemental gradients around the untreated fiber. Micro-CT and DTG analyses indicated increased porosity and altered hydration products in the near-fiber region. Targeted microindentation of the critical RSF interface showed a clear radial hardness gradient, with the contact-zone mean hardness approximately 36.5% lower than the outer-zone mean after exclusion of one physically inconsistent outer-zone measurement. These results demonstrate that sisal extractives generate a chemically active interfacial hydration halo that governs water mobility, hydration kinetics, pore formation and local hardness. The findings provide a mechanistic basis for designing fiber treatments and preconditioning strategies for bio-based cementitious composites.
No takes yet. Share an insight, caveat, or question.
Ferreira et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: