Answers are grounded in this paper and cite their sources.
Onshore Power Supply (OPS) systems are a cornerstone of maritime decarbonization, enabling berthed ships to receive electrical power from the terrestrial grid and eliminate auxiliary diesel generator operation during port stays. This paper proposes a hybrid shore-to-ship (STS) architecture that integrates conventional wired three-phase AC delivery with inductive power transfer (IPT) on a shared DC bus and verifies its operation experimentally at reduced power. The power conversion chain comprises a three-level neutral-point-clamped (3LNPC) active front-end rectifier for DC-bus regulation, a 3LNPC inverter providing 50 Hz or 60 Hz ship-compatible AC output, and a high-frequency H-bridge inverter driving a series-series (SS) compensated IPT resonant stage. A laboratory prototype whose hardware is designed for a rated power of 20 kW, incorporating SiC-based converter modules, FPGA-based digital control, optical-fiber communication links, and a modular backplane architecture, is designed and implemented. In laboratory tests at a nominal 50 V DC bus, supplied by an autotransformer and a diode rectifier, and with both output stages in open loop, the prototype simultaneously delivered about 14–27 W to a three-phase load at 50 Hz and 60 Hz and about 112–122 W across a 30 mm air gap through the SS link switched at 20 kHz, with an estimated IPT efficiency of about 86% with the unregulated bus at about 45 V. These low-power results demonstrate the feasibility of integrating an inductive power path into a shore power infrastructure under a unified DC bus and control platform.
No takes yet. Share an insight, caveat, or question.
Jesus et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: