Answers are grounded in this paper and cite their sources.
MoS2/WS2 heterostructures can be grown over large areas by sulphurising sputtered precursors, but Mo-W interdiffusion across the interface limits the usable temperature. Metallic Mo/W and sulphide MoSx/WSx stacks, sputtered at room temperature or with one or both layers at 500 °C, were sulphurised in a confined graphite box for 15 min between 500 and 700 °C, and characterised by X-ray reflectivity and diffraction, Raman spectroscopy at 532 and 633 nm and electron microscopy. For room-temperature precursors, sulphurisation at 550 to 650 °C produced crystalline, textured MoS2 and WS2, with a separation of 9.3 to 10.3 cm−1 between the A1g Raman bands at the sample centre. At 500 °C both disulphides formed from the metallic stack, while the sulphide WSx layer did not crystallise. At 700 °C the two A1g bands converged, the crystallite size doubled and the reflectivity fringes were damped, which we attribute to Mo-W mixing. Precursors deposited at 500 °C and sulphurised at 650 °C showed no larger A1g separation, and the metallic stacks showed the same band convergence near the sample edges. Sulphurisation of room-temperature precursors at 550 to 650 °C thus produces MoS2/WS2 heterostructures with separate MoS2 and WS2 Raman bands in a single step.
No takes yet. Share an insight, caveat, or question.
Sava et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: